Libre Antenne

Parce que les paroles s'envolent, les écrits restent ici.

Vous n'êtes pas identifié(e).

Annonce

#1 2020-10-28 09:13:41

Katrina Hynds
Écouteur
Inscription : 2020-09-21
Messages : 6

What are the characteristics of Raised Access Floor

1. All steel structure, high mechanical strength, strong bearing capacity, good impact resistance;
2. Surface electrostatic spray, soft light, wear-resistant, waterproof, fireproof, dust-proof, anti-corrosion;
3. The decorative high-voltage laminate pasted has excellent wear resistance and anti-static performance, anti pollution, easy cleaning and strong decoration;
4. High dimensional accuracy, good interchangeability, flexible assembly, convenient maintenance and durability;
5. Four sides fixed, easy to install, Raised Access Floor can be cut at will, easy to install accessories;
6. The lower space can be used for air conditioning and ventilation, and the ventilation rate of the bottom Raised Access Floor  can be adjusted with the ventilation board;
7. For the overweight equipment, as long as the bracket is added under the Raised Access Floor , the bearing problem can be solved;
8. It is easy to disassemble and assemble. As long as the decorative veneer is replaced, it can be reused;
9. When installing the ground socket, the hole can be opened according to the specification of the ground socket.

Background technology:
Because the Raised Access Floor is set on the ground by using the way of frame height, there will be a certain space between the panel of the Raised Access Floor and the ground, which can be used to lay wires or return air ducts. Therefore, Raised Access Floor is widely used in factory building, such as dust-free room.
The traditional Raised Access Floor is mainly equipped with holes on the panel as the return air channel. However, because the opening is too large, it is easy to cause the floor's compressive capacity to weaken and produce excessive deformation.

Hors ligne

Pied de page des forums